Solyntek home
Call Solyntek+1 438-282-8603Email Solyntekcontact@solyntek.com
ENFR
Request Live Demo
Products
Industries
Resources
About us
Contact us
InSolyntek on YouTube
Safety risks we detect
  • •PPE non compliance
  • •Vehicle-Pedestrian Near Misses
  • •Restricted Area Monitoring
  • •Ergonomics
  • •Industrial fire
  • •Slip and fall
Product Overview
AI Edge System
ChatBot
Reporting
Privacy
Integrations
Manufacturing
Warehousing & Logistics
Construction
Blog
Podcast
ROI Calculator
  1. Home
  2. /Glossary
  3. /Lockout/tagout (LOTO)

What is lockout/tagout?

Lockout/tagout (LOTO) controls hazardous energy during servicing and maintenance to prevent unexpected startup or energy release. Lockout secures energy-isolating devices; tagout provides warnings under an established procedure. Effective energy control also addresses stored energy and verifies isolation before work begins. A stop button alone does not isolate energy.

Key facts

  • Hazardous energy includes more than electricity.
  • Push buttons are not energy-isolating devices.
  • A tag warns; it does not physically restrain an isolating device.

What must an energy-control procedure address?

CCOHS recommends identifying the equipment and energy sources, specifying shutdown and isolation measures, controlling stored energy, verifying isolation, and defining safe restoration to service.

Can tagout replace lockout?

Under OSHA 1910.147, lockout is required when the isolating device can be locked, unless the employer demonstrates that a tagout system provides the required equivalent protection. A warning tag alone does not provide a lock’s physical restraint.

Frequently asked questions

Is switching off a machine enough?

No. Stopping operation does not establish that hazardous energy has been isolated and stored energy made safe.

What does CNESST specify for several workers?

CNESST states that each person entering the machine’s danger zone must apply their own lock when the lockout method is used.

Sources

  1. Lockout/Tag out, Canadian Centre for Occupational Health and Safety (accessed October 28, 2026)
  2. Exposition aux zones dangereuses d’une machine, CNESST (accessed October 28, 2026)
  3. 29 CFR 1910.147 – The control of hazardous energy (lockout/tagout), Electronic Code of Federal Regulations (eCFR) (accessed October 28, 2026)

Related

  • What is the hierarchy of controls?
  • What is a job hazard analysis?
  • Restricted area monitoring
  • Manufacturing

See how Solyntek detects these risks on your existing cameras.

Request a demo

Written by Solyntek Editorial Team · Reviewed by Solyntek Admin · Published October 28, 2026 · Updated October 28, 2026

Ready to work with us?

Contact us

Subscribe to our newsletter

Join our newsletter to stay up to date with the latest safety regulations, expert tips, and product updates.

Solyntek

Solyntek's AI-powered guardian turns your security cameras into a proactive safety system that detects and reports dangerous situations.

InSolyntek YouTube channel

Industries

Warehousing & Logistics
Manufacturing
Construction

Models

Area Control
Slip and fall
Fire and Smoke
Vehicle Control
PPE Detection
Ergonomics

Contact

+1 438-282-8603
contact@solyntek.com
Montreal, Canada

Solyntek

Products
Industries
About us
Blog
Contact us
Glossary
Editorial Policy

© 2026 Solyntek. All rights reserved.

Terms and ConditionsPrivacy Policy