What is Québec Law 25?
Québec Law 25 modernized the province’s personal information protection laws. For businesses, it strengthened requirements concerning accountability, transparency, privacy assessments, incidents, and individuals’ rights. Workplace camera and AI projects must assess their handling of identifiable information, including whether collection is necessary and how information is protected.
Key facts
- Law 25 amended Québec’s private-sector and public-sector privacy legislation.
- Personal information is any information about a person that allows them to be identified, directly or indirectly.
- People must be told first when information is collected with technology that can identify, locate or profile them.
- The CAI lists AI systems and video-surveillance systems as examples of information systems that call for a privacy impact assessment.
- A business’s highest authority is its privacy officer by default; the function can be delegated in writing.
- Local processing and blurring reduce privacy risks but do not by themselves make information anonymous or a project compliant.
- Solyntek uses no facial recognition, keeps no continuous video recordings and blurs faces or full bodies in alert clips.
Does Law 25 apply to workplace cameras and AI video analytics?
Québec privacy legislation applies when camera images or associated information identify a person directly or indirectly. Facial recognition is not required for information to qualify as personal information.
For example, a blurred safety alert may remain identifiable when its camera reference and timestamp can be matched to original footage held in a separate recording system.
The sections below focus on private-sector businesses, governed by the Act respecting the protection of personal information in the private sector (P-39.1). Public bodies operate under a separate act. Some requirements, including the limit on collecting more than is necessary, predate Law 25.
This page is general information, not legal advice. For a specific project, consult the legislation, the CAI’s guidance and, where needed, a lawyer.
What must workers be told about AI camera technology?
When a business collects personal information using technology that includes functions allowing a person to be identified, located or profiled, it must first inform the person of the use of that technology and of the means available to activate those functions (section 8.1).
The Act defines profiling as collecting and using personal information to assess characteristics of a person, in particular their work performance, health, interests or behaviour. Safety analytics that detect behaviour should therefore be assessed against this rule, especially when results can be linked to a named worker.
This notice comes in addition to the general information a business must give when collecting personal information, such as the purposes, the means of collection and the person’s rights. If a decision about a person is based exclusively on automated processing, the person must also be told (section 12.1).
Does processing video in memory remove privacy obligations?
No. Processing in memory (RAM) can avoid storing or transmitting video, but identifiable images are still being processed while the analysis runs.
Event clips and alert records created from that processing must be assessed on their own: what they contain, who can see them, how long they are kept and where they go. Any recording by the customer’s own NVR or VMS is a separate part of the customer’s video-surveillance environment and needs its own assessment.
Does blurring people make event clips anonymous?
Not necessarily. Under the Act, information is anonymized only if it is reasonably foreseeable that it irreversibly no longer allows the person to be identified, directly or indirectly (section 23). Blurring reduces visual exposure, but a person may remain identifiable through context, clothing, location or comparison with other records.
For example, a supervisor could consult the NVR using the camera reference and event time. That review may happen outside the analytics system, but the possibility of linking the records remains relevant to the privacy assessment.
Describe such clips as blurred rather than anonymous. Blurring is a safeguard; it does not replace access controls, justified retention or an assessment of the monitoring purpose.
This is why Solyntek offers two privacy modes. Face blurring suits most sites; full-body blurring also hides clothing, build and posture, which helps in small teams where those details could reveal who is in the clip.
Can safety alerts keep timestamps and camera locations?
Yes, when that information is necessary for purposes determined before it is collected (section 5). Privacy legislation does not require every operational record to be anonymous.
Time and location can support investigating an event, identifying recurring hazards, comparing periods or zones, and evaluating corrective measures. Document why each field is needed and choose the level of precision the purpose actually requires.
Access and retention should follow those purposes. Summary dashboards can use grouped results, while precise event details can be restricted to the people who need them. Grouping does not automatically prevent identification, particularly in small teams or sparsely staffed areas.
When is a privacy impact assessment required?
A business must conduct a privacy impact assessment for any project to acquire, develop or overhaul an information system or electronic service delivery system involving personal information (section 3.3). It must consult its privacy officer from the outset of the project.
The CAI’s assessment guide lists AI systems and video-surveillance systems among examples of information systems. A project that adds analytics to existing cameras should therefore be examined against this requirement, even if it uses local processing and installs no new cameras.
An assessment is also required before communicating personal information outside Québec, including when a provider outside Québec is entrusted with collecting, using or keeping it on the business’s behalf. The communication then requires a written agreement that reflects the assessment (section 17).
How does Solyntek’s design make a Law 25 assessment simpler?
The less personal information a system collects, keeps and sends elsewhere, the less there is to justify, protect and document. Solyntek was designed around that principle:
- No facial recognition. Solyntek detects hazards, not identities. Systems that do use facial recognition or other biometric characteristics face additional rules under Québec’s Act to establish a legal framework for information technology.
- No continuous recording. Live streams are analyzed in memory (RAM) and Solyntek keeps no continuous video, so the information to assess centres on the clips and alerts that safety events trigger.
- Blurring built in. Alert clips are blurred with one of two privacy modes, face blurring or full-body blurring, chosen to fit the site.
- On-premises first. Most deployments run on site, so video stays on the customer’s premises. Cloud deployment is available for customers who prefer it and works the same way: streams are analyzed in memory and only alert clips are kept. It is hosted in Canada and can be moved to the server location the customer requires, including Québec, so information does not have to leave the province.
- Your existing cameras. Solyntek works with existing IP cameras, so no new cameras are installed.
What governance and retention measures should a business establish?
The person exercising the highest authority in a business is its privacy officer by default, although that function may be delegated in writing. The officer’s title and contact information must be published on the website, or made available by another appropriate means if there is no website (section 3.1).
The business must adopt governance policies and practices covering the keeping and destruction of information, staff roles and responsibilities, and complaints, and publish detailed information about them in clear language (section 3.2).
For video analytics, turn these requirements into documented rules for accessing alerts, exporting clips, retaining event information and handling requests. Once the purposes are achieved, the information must be destroyed or anonymized, subject to any retention period required by law (section 23).
Frequently asked questions
Does Law 25 prohibit AI workplace safety monitoring?
No, it does not impose a blanket prohibition. The business must meet the applicable requirements, including necessity, transparency, security and any required privacy impact assessment. Other workplace and privacy rules, such as the Québec Charter of human rights and freedoms, may also apply.
Does Solyntek make my business Law 25 compliant?
No system can do that on its own: the assessment, notice to workers and retention rules remain the business’s responsibility. Solyntek’s design gives that work far less to cover, with no facial recognition, no continuous recording, blurred clips and on-premises processing. Book a demo to see how alerts, clips and privacy modes work before you start your assessment.
Does employee consent justify any camera use?
No. Consent does not replace the rule that a business may collect only the information necessary for the purposes it has determined.
Does local processing guarantee compliance?
No. It is a useful architectural safeguard. Compliance also depends on the purpose, configuration, notice, access, retention, disclosures and organizational practices.
What if an alert clip is accessed without authorization?
Unauthorized access is a confidentiality incident. The business must take reasonable measures to reduce the risk of injury and record the incident in its register. If it presents a risk of serious injury, the business must promptly notify the CAI and the people concerned.
Does delegating the privacy officer role remove senior management’s accountability?
No. The CAI states that the highest authority remains accountable for compliance and implementation.
Sources
- Act respecting the protection of personal information in the private sector (chapter P-39.1), sections 2, 3.1–3.8, 5, 8.1, 12.1, 17 and 23, Légis Québec (Publications du Québec) (accessed November 14, 2026)
- Principaux changements aux lois sur la protection des renseignements personnels, Commission d’accès à l’information du Québec (accessed October 28, 2026)
- Responsabilité des entreprises, Commission d’accès à l’information du Québec (accessed October 28, 2026)
- Lois et règlements, Commission d’accès à l’information du Québec (accessed October 28, 2026)
Related
See how Solyntek detects these risks on your existing cameras.
Request a demoWritten by Solyntek Editorial Team · Reviewed by Solyntek Admin · Published · Updated
